Product listing
Cleave - Smart Model Split & Cut for 3D Printing with Connectors (Pegs, Dowel, Rod channel, Magnets, Ball Joints)
By V4SS3UR ·
From $23.00
Listing details
A Blender add-on that splits big STL models into printable parts along their natural joints, with pegs, dovetails or magnet pockets that fit. For miniatures, busts, cosplay props, terrain, statues and AI-generated models.
Categories
Tags
Compare with other products
Choose a category to find products to compare with this listing.
Variants
-
Cleave - Support the developer published
Price: $28.00 · List price: $28.00
Variant versions
-
v1.7.0 published
Created Nov 17, 2026 · Published Nov 17, 2026
Release notes (source)
<p><span style="font-weight:bolder;">Features</span></p><ul> <li> <span style="font-weight:bolder;">Seams</span>: Seam from Points lays a seam point by point. Runs it along the surface.</li> <li> <span style="font-weight:bolder;">Seams</span>: Cut surface gap leaves a small adjustable space between the two cut faces, to make up for print defects.</li> <li> <span style="font-weight:bolder;">Connectors</span>: the part of the active connector that stands outside the model shows in red.</li> </ul><p><span style="font-weight:bolder;">Improvements</span></p><ul> <li> <span style="font-weight:bolder;">Connectors, Scan, Seams</span>: faster on dense models.</li> <li> <span style="font-weight:bolder;">Connectors</span>: when Manifold cannot cut a piece, the panel says so.</li> </ul>
-
v1.6.1 published
Created Nov 2, 2026 · Published Nov 2, 2026
Release notes (source)
<p><span style="font-weight:bolder;">Improvements</span></p><ul><li> <span style="font-weight:bolder;">Seams</span>: when Extrude says it breaks out, yellow dots show where.</li></ul><p><span style="font-weight:bolder;">Fixes</span></p><ul><li> <span style="font-weight:bolder;">Seams</span>: a point dragged in Edit Seam Points stays on the model's surface, even from behind it.</li></ul>
-
v1.6.0 published
Created Oct 28, 2026 · Published Oct 28, 2026
Release notes (source)
<p><b>Features</b></p><ul> <li> <b>Ball joints: </b>A new connector for posable figures. The parts move and hold their pose. See where a part will sit once assembled.</li> <li> <b>Seams</b>:<b> </b>Copy a hand-made joint. Leave a cut open, model the cap by hand on one side, and one click copies it into the other side and closes the cut.</li> </ul>
-
v1.5.1 published
Created Oct 21, 2026 · Published Oct 21, 2026
Release notes (source)
<p><span style="font-weight: bolder;">Features</span></p><ul><li><span style="font-weight: bolder;">Seams:</span> Leave Open cuts without a cut face, leaving one clean edge loop on each piece to model the joint by hand.</li></ul><p><span style="font-weight: bolder;">Improvements</span></p><ul><li><span style="font-weight: bolder;">Seams:</span> Extrude has no depth limit, says why a depth does not fit, and previews faster.</li></ul><p><span style="font-weight: bolder;">Fixes</span></p><ul><li><span style="font-weight: bolder;">Seams:</span> Extrude accepts jagged and steep seams that fit, a plug it cannot build is refused before the cut.</li></ul>
-
v1.5.0 published
Created Oct 20, 2026 · Published Oct 20, 2026
Release notes (source)
<p><span style="font-weight: bolder;">Features</span></p><ul><li><span style="font-weight: bolder;">Connectors:</span> Dowel (round hole per piece for a separately printed pin; Export writes pins beside the pieces or into the 3MF).</li><li><span style="font-weight: bolder;">Connectors:</span> Rod Channel (hole for a reinforcing rod through every piece it crosses; the panel gives the rod length to cut).</li><li><span style="font-weight: bolder;">Printer:</span> Print View packs pieces onto as few plates as needed; One 3MF writes one file per plate.</li><li><span style="font-weight: bolder;">Parts:</span> Parts From Materials splits by the model's materials or a colour attribute.</li></ul><p><span style="font-weight: bolder;">Improvements</span></p><ul><li><span style="font-weight: bolder;">Paint:</span> Shift+Wheel resizes the brush; smoother on dense models.</li><li><span style="font-weight: bolder;">Seams:</span> Seam From Loop follows the cursor live on dense models; faster cutting.</li><li><span style="font-weight: bolder;">Connectors:</span> smoother move/resize, live booleans stay in place until release, faster Apply.</li><li><span style="font-weight: bolder;">Parts:</span> faster Scan on dense models; Split All Parts at Once moved to the foot of the Part Finder.</li><li><span style="font-weight: bolder;">Interface:</span> light sidebar redesign, plus a Simple mode with every stage's basic controls in one panel.</li></ul>
-
v1.4.0 published
Created Oct 11, 2026 · Published Oct 11, 2026
Release notes (source)
<p><span style="font-weight: bolder;">Features</span></p><ul><li><span style="font-weight: bolder;">Seams:</span> Extrude pushes the cut face into a plug and the pocket it fits, with a draft angle and a clearance, so a nearly flat part such as an eye comes off thick enough to print and glue back.</li></ul>
-
v1.3.0 published
Created Oct 10, 2026 · Published Oct 10, 2026
Release notes (source)
<p><b>Features</b></p><ul> <li> <b>Seams:</b> Seam From Loop lays a seam on the ring you hover round a part; Shift+Wheel turns it, Ctrl+Shift+Wheel leans it, G follows the groove, S toggles Snap to groove.</li> <li> <b>Connectors:</b> the peg has a Profile: Rectangle, Round (cylinder or cone), D, which fits only one way, or Dovetail.</li> <li> <b>Printer:</b> choose your printer in the preferences to see which pieces fit, and Print View shows each one on its own plate, in its print pose.</li> <li> <b>Export:</b> every piece in one 3MF, pieces laid flat on their cut or in their print pose, and a warning for pieces too big for the printer.</li> </ul>
-
v1.2.1 published
Created Oct 6, 2026 · Published Oct 6, 2026
Release notes (source)
<p><span style="font-weight: bolder;">Fixes</span></p><ul><li>Connectors: the dovetail is a peg straight on two sides again.</li></ul>
-
v1.2.0 published
Created Oct 4, 2026 · Published Oct 4, 2026
Release notes (source)
<p><i>Highlights: new Paint options (Through, Fill Gaps), plus a big round of reliability fixes for seams, connectors, pieces and export.</i></p><p><b>New</b></p><ul><li>Paint › Through: paints faces hidden behind the model, no X-ray needed.</li><li>Paint › Fill Gaps: automatically paints faces a stroke missed.</li><li>Connectors: deselect with the ✕ button or by clicking empty space.</li></ul><p><b>Important</b></p><ul><li>Apply shape modifiers before running Scan or Cut.</li></ul><p><b>Fixed</b></p><p><u>Scan & Parts</u></p><ul><li>Tiny specks are no longer listed as parts.</li></ul><p><u>Seams</u></p><ul><li>An uncut seam now stays on the model when you reopen the file.</li></ul><p><u>Connectors</u></p><ul><li>A connector that doesn't fit its section is now reported instead of being exported broken.</li></ul><p><u>Pieces</u></p><ul><li>Renamed, duplicated, separated or joined pieces keep their connectors and history.</li><li>A Shift+D copy is no longer exported.</li></ul><p><u>Make Manifold</u></p><ul><li>Hollow models stay hollow.</li><li>It now stops before rebuilding more than 3 % of a piece, to protect your geometry.</li></ul><p><u>Export</u></p><ul><li>Pieces in excluded collections are now exported.</li><li>Names that differ only in case no longer overwrite each other.</li><li>Numbering restarts for each model.</li></ul>
-
v1.1.0 published
Created Oct 4, 2026 · Published Sep 24, 2026
Release notes (source)
<p><span style="font-weight:bolder;">Features</span></p><ul> <li>Slide a flat cut surface along the part.</li> <li>Slide and the tilts have < > arrows that step by 0.1.</li> <li>Propose a seam between two parts.</li> <li>Make Manifold closes a piece so booleans take it.</li> </ul><p><span style="font-weight:bolder;">Fixes</span></p><ul> <li>A cut repaints its pieces in their parts colours, caps included.</li> <li>A connector that cannot be cut into both pieces is not applied at all.</li> <li>Auto Scale is off by default.</li> <li>A fully flattened seam gives a flat, evenly woven cut face.</li> </ul>
-
v1.0.0 published
Created Oct 4, 2026 · Published Sep 23, 2026
Release notes (source)
<p><br></p>
-
-
Cleave published
Price: $23.00 · List price: $23.00
Variant versions
-
v1.7.0 published
Created Nov 17, 2026 · Published Nov 17, 2026
Release notes (source)
<p><span style="font-weight:bolder;">Features</span></p><ul> <li> <span style="font-weight:bolder;">Seams</span>: Seam from Points lays a seam point by point. Runs it along the surface.</li> <li> <span style="font-weight:bolder;">Seams</span>: Cut surface gap leaves a small adjustable space between the two cut faces, to make up for print defects.</li> <li> <span style="font-weight:bolder;">Connectors</span>: the part of the active connector that stands outside the model shows in red.</li> </ul><p><span style="font-weight:bolder;">Improvements</span></p><ul> <li> <span style="font-weight:bolder;">Connectors, Scan, Seams</span>: faster on dense models.</li> <li> <span style="font-weight:bolder;">Connectors</span>: when Manifold cannot cut a piece, the panel says so.</li> </ul>
-
v1.6.1 published
Created Nov 2, 2026 · Published Nov 2, 2026
Release notes (source)
<p><b>Improvements</b></p><ul><li> <b>Seams</b>: when Extrude says it breaks out, yellow dots show where.</li></ul><p><b>Fixes</b></p><ul><li> <b>Seams</b>: a point dragged in Edit Seam Points stays on the model's surface, even from behind it.</li></ul>
-
v1.6.0 published
Created Oct 28, 2026 · Published Oct 28, 2026
Release notes (source)
<p><span style="font-weight:bolder;">Features</span></p><ul> <li> <span style="font-weight:bolder;">Ball joints: </span>A new connector for posable figures. The parts move and hold their pose. See where a part will sit once assembled.</li> <li> <span style="font-weight:bolder;">Seams</span>:<span style="font-weight:bolder;"> </span>Copy a hand-made joint. Leave a cut open, model the cap by hand on one side, and one click copies it into the other side and closes the cut.</li> </ul>
-
v1.5.1 published
Created Oct 21, 2026 · Published Oct 21, 2026
Release notes (source)
<p><b>Features</b></p><ul> <li> <b>Seams:</b> Leave Open cuts without a cut face, leaving one clean edge loop on each piece to model the joint by hand.</li> </ul><p><b>Improvements</b></p><ul> <li> <b>Seams:</b> Extrude has no depth limit, says why a depth does not fit, and previews faster.</li> </ul><p><b>Fixes</b></p><ul> <li> <b>Seams:</b> Extrude accepts jagged and steep seams that fit, a plug it cannot build is refused before the cut.</li> </ul>
-
v1.5.0 published
Created Oct 20, 2026 · Published Oct 20, 2026
Release notes (source)
<p><b>Features</b></p><ul> <li> <b>Connectors:</b> Dowel (round hole per piece for a separately printed pin; Export writes pins beside the pieces or into the 3MF).</li> <li> <b>Connectors:</b> Rod Channel (hole for a reinforcing rod through every piece it crosses; the panel gives the rod length to cut).</li> <li> <b>Printer:</b> Print View packs pieces onto as few plates as needed; One 3MF writes one file per plate.</li> <li> <b>Parts:</b> Parts From Materials splits by the model's materials or a colour attribute.</li> </ul><p><b>Improvements</b></p><ul> <li> <b>Paint:</b> Shift+Wheel resizes the brush; smoother on dense models.</li> <li> <b>Seams:</b> Seam From Loop follows the cursor live on dense models; faster cutting.</li> <li> <b>Connectors:</b> smoother move/resize, live booleans stay in place until release, faster Apply.</li> <li> <b>Parts:</b> faster Scan on dense models; Split All Parts at Once moved to the foot of the Part Finder.</li> <li> <span style="font-weight:bolder;">Interface:</span> light sidebar redesign, plus a Simple mode with every stage's basic controls in one panel.</li> </ul>
-
v1.4.0 published
Created Oct 11, 2026 · Published Oct 11, 2026
Release notes (source)
<p><b>Features</b></p><ul><li><b>Seams:</b> Extrude pushes the cut face into a plug and the pocket it fits, with a draft angle and a clearance, so a nearly flat part such as an eye comes off thick enough to print and glue back.</li></ul>
-
v1.3.0 published
Created Oct 10, 2026 · Published Oct 10, 2026
Release notes (source)
<p><b>Features</b></p><ul> <li> <b>Seams:</b> Seam From Loop lays a seam on the ring you hover round a part; Shift+Wheel turns it, Ctrl+Shift+Wheel leans it, G follows the groove, S toggles Snap to groove.</li> <li> <b>Connectors:</b> the peg has a Profile: Rectangle, Round (cylinder or cone), D, which fits only one way, or Dovetail.</li> <li> <b>Printer:</b> choose your printer in the preferences to see which pieces fit, and Print View shows each one on its own plate, in its print pose.</li> <li> <b>Export:</b> every piece in one 3MF, pieces laid flat on their cut or in their print pose, and a warning for pieces too big for the printer.</li> </ul>
-
v1.2.1 published
Created Oct 6, 2026 · Published Oct 6, 2026
Release notes (source)
<p><b>Fixes</b></p><ul><li>Connectors: the dovetail is a peg straight on two sides again.</li></ul>
-
v1.2.0 published
Created Oct 4, 2026 · Published Oct 4, 2026
Release notes (source)
<p><i>Highlights: new Paint options (Through, Fill Gaps), plus a big round of reliability fixes for seams, connectors, pieces and export.</i></p> <p><b>New</b></p><ul><li>Paint › Through: paints faces hidden behind the model, no X-ray needed.</li><li>Paint › Fill Gaps: automatically paints faces a stroke missed.</li><li>Connectors: deselect with the ✕ button or by clicking empty space.</li></ul> <p><b>Important</b></p><ul><li>Apply shape modifiers before running Scan or Cut.</li></ul> <p><b>Fixed</b></p> <p><u>Scan & Parts</u></p><ul><li>Tiny specks are no longer listed as parts.</li></ul> <p><u>Seams</u></p><ul><li>An uncut seam now stays on the model when you reopen the file.</li></ul> <p><u>Connectors</u></p><ul><li>A connector that doesn't fit its section is now reported instead of being exported broken.</li></ul> <p><u>Pieces</u></p><ul><li>Renamed, duplicated, separated or joined pieces keep their connectors and history.</li><li>A Shift+D copy is no longer exported.</li></ul> <p><u>Make Manifold</u></p><ul><li>Hollow models stay hollow.</li><li>It now stops before rebuilding more than 3 % of a piece, to protect your geometry.</li></ul> <p><u>Export</u></p><ul><li>Pieces in excluded collections are now exported.</li><li>Names that differ only in case no longer overwrite each other.</li><li>Numbering restarts for each model.</li></ul>
-
v1.1.0 published
Created Sep 24, 2026 · Published Sep 24, 2026
Release notes (source)
<p><b>Features</b></p><ul> <li>Slide a flat cut surface along the part.</li> <li>Slide and the tilts have < > arrows that step by 0.1.</li> <li>Propose a seam between two parts.</li> <li>Make Manifold closes a piece so booleans take it.</li> </ul><p><b>Fixes</b></p><ul> <li>A cut repaints its pieces in their parts colours, caps included.</li> <li>A connector that cannot be cut into both pieces is not applied at all.</li> <li>Auto Scale is off by default.</li> <li>A fully flattened seam gives a flat, evenly woven cut face.</li> </ul>
-
v1.0.0 published
Created Sep 24, 2026 · Published Sep 23, 2026
Release notes (source)
<p><br></p>
-
Related products
More from this creator
No other products from this creator.